CREEP FEEDERS
The Cypress
Industries Creep
Feeder comes with spring assist fold up panels. The fold up panels hinge
over the top of the feeder for fast efficient changes from field to
transport position. When the panels are in the creep feeding position, two
braces securely hold the panels to eliminate shifting so the calves feel
more comfortable entering the feeding area.
The Cypress Industries Creep Feeder is easily converted into a stationary
feeder by removing the panels. This procedure has been made easy - just
remove two pins and one spring. It is a very durable feeder with 14 gauge
all steel construction and has a large weather proof filling door. The
Cypress Industries Creep
Feeder also has several convenient features including jack stands front and
back, adjustable feed openings from 1 in. to 7 in. A peaked floor for
complete clean out of your feed. Spring assist fold up panels and a
convenient location for a mineral feeder. Sturdy steps on the side of the
feeder allows you to climb them safely. This feeder is also easily towed by
your truck. Bushel sizes are approximately 60, 100, 250, 320, 375 and 495. |
 |
| |
BISON FEEDERS
Our four sided feeder is designed primarily for
buffalo. But due to the versatility of this feeder it is also used for
horses and cattle. The open corners allow for peripheral vision so the
animals do not feel confined. The hitch is removable and the swing up ladder
creates a complete bump free zone.
The head room in the manger is wide enough for a bison head at 22+in. The
feed openings are adjustable from 1in. to 7in. and has jack stands front and
back. The catwalk around the feeder protects the manger from moisture and
allows easy access to the full size door for convenient filling. The durable
feeder sits on a 10,000 lb axle and has 11L15 tires and thus for trouble
free moving. The feeder also holds approximately 300 bushels. A peaked floor
for complete clean out of your feed.This feeder is also easily towed by your
truck. |
 |
| |
 |
BUNK FEEDERS
The Cypress Industries bunk feeder is
available in either 12 or 14 gauge steel. They come with pre-drilled drain
holes at each end. Our sturdy legs are made out of 1¼ in, square tubing. The
standard size is 10 ft. long by 29 in. wide and 28 in. high. Upon request
higher legs are available for larger animals. They are made stackable for
convenient storage or for transporting. |
| |
STATIONARY FEEDERS
Cypress Industries Stationary Feeders are maintenance free. They are
waterproof, rodent proof and the all steel 14 gauge construction makes it a
very durable feeder. The feeders are also commonly used in feedlots for
horses. The feeder has large filling doors, and easily adjustable feed
openings from 0 in. to 7 in. Outside steps are standard and inside ladders
are optional. They have been field proven since 1982.
Custom built models are also available
including manger size.
Bushel sizes - approximate
The standard sizes range from:
10 ft. which holds 400 bushels
15 ft. which holds 600 bushels
20 ft. which holds 800 bushels
and a 30 ft. which holds 1200 bushels. |
 |
| |
 |
60 BUSHEL CREEP FEEDERS
Our 60 bushel Cypress Industries Creep Feeder is 8 ft. long and
feeds on one side. It comes with a fold up panel. The feeder has a full
length weatherproof filling door and is manufactured from 14 gauge steel.
The adjustable feed openings are from 1-7" and the hardware is all stainless
steel. |
100 BUSHEL CREEP FEEDERS
Feeder set up ready for calves to enter
the feeding area. Two braces securely hold the panels to eliminate shifting
so the calves feel more comfortable.
In the transport position the panels are secured to the manger. |
 |
